数控铣床加工低碳钢零件的进给速度优化

论述了数控铣床加工低碳钢零件时进给速度的优化问题．在基于加工效率（可等效转化为加工工时）和加工成本目标函数的基础上，对这两个目标函数运用多目标函数理论进行综合，得到了多目标综合函数．通过计算，并综合表面粗糙度，进而得到进给速度的优化范围，并对不同转速下的进给速度给出了相应的优化参数，目的更接近生产实际，使技术人员不仅了解影响生产效率和成本的因素，也可在实际生产的应用中更加快捷和方便．     

Assessing the impact of reduced visibility on traffic crash risk using microscopic data and surrogate safety measures

Due to the difficulty of obtaining accurate real-time visibility and vehicle based traffic data at the same time, there are only few research studies that addressed the impact of reduced visibility on traffic crash risk. This research was conducted based on a new visibility detection system by mounting visibility sensor arrays combined with adaptive learning modules to provide more accurate visibility detections. The vehicle-based detector, Wavetronix SmartSensor HD, was installed at the same place to collect traffic data. Reduced visibility due to fog were selected and analyzed by comparing them with clear cases to identify the differences based on several surrogate measures of safety under different visibility classes. Moreover, vehicles were divided into different types and the vehicles in different lanes were compared in order to identify whether the impact of reduced visibility due to fog on traffic crash risk varies depending on vehicle types and lanes. Log-Inverse Gaussian regression modeling was then applied to explore the relationship between time to collision and visibility together with other traffic parameters. Based on the accurate visibility and traffic data collected by the new visibility and traffic detection system, it was concluded that reduced visibility would significantly increase the traffic crash risk especially rear-end crashes and the impact on crash risk was different for different vehicle types and for different lanes. The results would be helpful to understand the change in traffic crash risk and crash contributing factors under fog conditions. We suggest implementing the algorithms in real-time and augmenting it with ITS measures such as VSL and DMS to reduce crash risk.     

低模量高伸长率硅酮密封胶在混凝土接缝防水中的应用

该文介绍了一种室温同化、低模量、高伸长率硅酮密封胶。其固化后邵氏硬度约为10．100%拉伸模量约为0．21MPa,伸长率达1250%,并具有良好的施工性能。这种密封胶对混凝土具有牢同的粘接性,位移能力达50级,主要用于道路、桥梁、机场、防洪防水堤坝、市政广场、体育场馆等混凝土建筑接缝(伸缩缝)的密封,具有长久防水密封效果。     

低温热水地板辐射采暖系统水力平衡分析

分析了地暖系统中重力循环作用压力对共用立管的影响,运用基尔霍夫定律分析了地暖系统中下分异程式双管系统和下分同程式双管系统的水力平衡状况,得出了在没有平衡调节装置的情况下,下分异程式双管系统更适用于地暖系统的结论,通过计算确定了地暖系统共用立管水力平衡的影响因素和平均比摩阻的范围.     

二灰稳定低液限粉土底基层性能研究

结合子洲~靖边高速公路4个合同段低液限粉土的情况,分别采用试验和理论分析的方法,对该地区广泛存在的低液限粉土底基层稳定性能进行了系统研究。首先对低液限粉土稳定土进行了物理、力学性质试验,取得了基本的研究参数。然后通过分析当前常用的路面底基层稳定土方案,对该地区的低液限粉土提出了稳定加固方案,并分析了加固机理和影响因素。     

低等级公路交通安全设施存在的问题及实例

通过分析目前我国二级和二级以下公路的交通工程设施在交通安全方面存在的主要问题,提出对于低标准设计的路段,在改变原有道路线型困难的情况下,可以通过设置合理的交通安全设施来保证行车安全。并以内蒙古S203线公路为例,提出保障其道路交通安全的具体措施。     

考虑老化的沥青结合料低温感温性指标

为了验证不同老化程度沥青结合料的针入度指数IP、当量脆点T1.2与SHRP低温弯曲梁流变指标间的关系,选取3种常用重交基质沥青进行薄膜烘箱试验和不同时长的压力老化容器老化,测定不同老化程度沥青在不同较高温度的针入度,得到针入度温度指数AlgP、K、IP和T1.2;测定不同较低温度60 s时的弯曲梁流变指标S、m,得到低温蠕变温度指数AlgS和Am。通过试验得出:随着老化程度的增加,沥青的感温性降低,温度稳定性增加,T1.2呈升高趋势;对不同老化程度的沥青而言,其较高温度下的针入度温度指标AlgP、K与较低温度下的低温蠕变温度指标AlgS、KlgS、Am、Km之间具有较好的相关性;中国“八五”攻关专题中建议的沥青低温性能评价指标IP和T1.2与SHRP建议的低温性能评价指标S和m之间具有较好的相关性。     

终轧温度对超低碳BH钢板组织和性能的影响

讨论了热轧终轧温度对罩式退火生产的Ti Nb超低碳烘烤硬化钢板的组织和性能的影响。结果发现,当终轧温度为910℃时,BH值较高,综合性能较好。终轧温度对冷轧织构影响不大,冷轧织构具有较强的｛112｝<110>织构;终轧温度为910℃时的退火织构的｛113｝<110>及其周围的织构较强。     

高速公路沥青路面低温季节施工技术探讨

台风活动频繁导致福建省高速公路的沥青路面需要在低温季节进行施工.通过分析低温施工对沥青路面性能的影响,对低温施工提出了相应的技术和管理保证措施.邵三高速公路的生产实践,证明这些措施能够很好保证施工质量.     

杭州湾跨海大桥水中低墩区钢管桩设计

结合杭州湾跨海大桥水中低墩区自然环境条件,对该区域桥梁钢管桩设计思路做了较详细的说明,包括从钢管桩设计方案的选择到钢管桩细部构造的设计思路,结构受力的理论计算,施工、制造工艺水平等方面。